Advertisement
Cautions
Whereas problems and malfunctions occurring with
a mini
floppy disk
drive can be
reso
lved relatively easily, malfunctions and
improper
use are
extremely difficult to correct on this hard disk drive.
Accordingly,
be
sure
to follow the below precautions whenever using this
unit.
1)
Back-up copy
This.unit is designed to assure high reliability. However, back up
copies of all programs and data should be retained
on separate
mini
floppy disks to prevent
loss
or damage of the same
in
the event
of
improper
operation or unit malfunction. Remember
that
correc·
tion of damaged data
and
programs may not be possible
if
back-up
copies are not
retained.
Refer to the manual
for software
sup-
porting this unit
to
make back-up copies.
2)
During unit access
Do not turn the power switch ON/OFF while the
power
for this
and the main computer are on as this may result
in damage
to the
data recorded on the disk or unit malfunction.
3)
Moving the hard disk drive
This is a precision device, requiring particular care
in hand ling
and
transportation. Before moving this unit execute
the HDTRNS
command (explained below) to position the head
where it
will be
least affected by
vibration
and si ight shocks.
Command
execution:
Input
HDTRNS
m
from the
key·
board.
4)
Power ON/OFF
To turn the power on, first turn the power for
this device
and
other peripherals on, and then turn the main unit
power on.
Similarly, first turn the main unit off, and then
turn off this
drive
and other peripherals.
5)
Operation
Wait at least 15
sec.
after turning the pov!er on
before operating
this device.
6)
Vibrations and shocks
Do not
subject this
device to any shocks or
vibrations
during
operation.
7)
Rapid temperature changes
To move this
unit to
where the temperature
is more than
10° C
different from
its
present location, first place it where
the tempera·
ture difference
is
less than 10°C for one hour, and
then gradually
increase
or decrease the temperature.
-3-
Advertisement
