Use Of Utility Program "Utility - Sharp MZ-80B Basic Manual

36
You obtain the object file (OBJ) "BASIC SB-5 5 1 0" on the diskette in drive 2 . Therefore, to call
BASIC interpreter SB-5 5 1 0 from the diskette file , simply enter
2.5 .2 U s e of utility program "Utility"
This utility program has two functions, that is, initializing diskettes and copying diskettes. To call
this utility program , enter
The display screen is as shown b elow.
When a I command is entered, the display is as shown in Figure 2 .4 .
The utility pro gram requests the operator to specify drive number.
When a new diskette is used, it must first be initialized (that is, formats the diskette so that data
are able to be written or read). During initialization, the diskette is formatt ed.
RUN "BASIC SB-5 5 1 0"
RUN "Utility"
* *
* *
UTILITY
[ COMMAND TABLE ]
DISKETTE INIT
SLAVE-DISK INIT
D ISKETTE COPY
BOOT START
? f29
[ COMMAND TABLE ]
DISKETTE INIT
SLAVE-DISK INIT
D ISKETTE COPY
BOOT START
? I
:=:::
D RIVE NO.
FIGURE 2 .4
I
S
C
B
FIGURE 2 .3
S
C
B