Table of Contents
Advertisement
20
Server Appliance Installation Guide
3. Enable policy-based termination—You can select the
checkbox to allow users with admin privileges to create policies that automatically
terminate wireless devices based on specific alarms or policy violations.
4. Enable port suppression—You can select the
users to suppress communication on the network switch port that a device is using to
communicate with the network, if inappropriate activity is detected.
Define Network Structure
The System Setup Wizard lets you quickly define Locations and Groups in the tree structure and place
sensors in them.
Alternative navigation:
• Use the buttons along the top of the tree window to:
• Add a new Location.
• Add a new Group.
• Delete a Location, Group, or Sensor.
• Select a Location, Group, or Sensor, and move it up in the tree.
• Select a Location, Group, or Sensor, and move it down in the tree.
To add a name or description for a Location or Group in the tree, select the Location or Group, and
then type the name or description.
You can make additional changes to the network structure from the Network Tree.
Create User Accounts
Use this page to Add, Edit, or Remove User Accounts.
Alternative navigation:
To add a user account:
1. Click the
2. Type or select values for user account settings.
3. Click
.
OK
>
Configuration
>
Configuration
button.
Add
Enable port suppression
Configuration Wizard
Configuration Wizard
Enable policy-based termination
checkbox to allow
>
Define Network Structure
>
Create User Accounts
Advertisement
Table of Contents
