Table of Contents
Advertisement
6
Server Appliance Installation Guide
3
Installation Steps
3.1 Step 1: Install the AirDefense Server Appliance
The first step in deploying AirDefense Enterprise is to physically install the appliance in a rack and
connect the cables.
1. Install the AirDefense Server in an equipment rack using the rails provided.
2. Connect the AirDefense Server to the network using the 10/100 LAN port on the back panel.
(See the next section for more information.)
3. For first-time installation, set up the AirDefense Server locally. Connect the keyboard and
monitor to the AirDefense Server, using the video and keyboard ports on the back panel.
Model 1250 / Model 3650 Appliance (Rear View)
Model 4250 Appliance (Rear View)
Advertisement
Table of Contents
