Attaching The Magellan Maestro To The Cradle; Adjust The Mount For Optimum Viewing; Connecting Power - Magellan Maestro 4245 User Manual

Make sure that the lever at the base of the
adjustable mount is in the up position. Place
the base of the swivel mount firmly over the
area to be used. Push the lever at the base of
the swivel mount all the way down until it
snaps in place. Carefully let go of the
assembly, making sure that it is securely
mounted.

Attaching the Magellan Maestro to the Cradle

Align the tabs on the cradle to the indents on the
bottom of the Magellan Maestro. Swivel the
cradle up so that it is flush against the back of the
receiver and snap it into place.

Adjust the Mount for Optimum Viewing

Loosen the adjustment locking knobs and position the Magellan Maestro for optimum viewing. Once
set, tighten the locking knobs. (Never attempt to adjust the mount while driving.)

Connecting Power

Plug the end of the cigarette lighter adapter into a
12 VDC vehicle power receptacle. Connect the
other end of the cable to the Magellan Maestro's
USB connector as shown. If there is power at the
receptacle, the Magellan Maestro will power on.
(Note: some vehicles apply power to the vehicle
power receptacle only when the ignition is on.)
Installation 4