Specifications - Mark Levinson N38 Operating Manual

Specifications

The correlation between published specifications and sonic quality is
unreliable. A list of numbers reveals virtually nothing. All technical
measurements must be subject to qualitative as well as quantitative
interpretation.
Measurements of the Nº38 yield excellent results by any standards.
However, only those specifications that apply to its actual operation
are included here.
Power consumption:
Mains voltage:
Overall dimensions:
Shipping weight:
Inputs:
1 Mark Levinson Link communications connector
Outputs:
1 stereo single-ended main out (Madrigal RCA female)
1 Mark Levinson Link communications connector
Gain:
Gain range:
Gain resolution:
Input overload:
Input impedance:
Output impedance:
Maximum output (MAIN outputs):
For more information, see your Mark Levinson dealer, or contact:
Madrigal Audio Laboratories, Inc.
P.O. Box 781
2081 South Main Street (Route 17)
Middletown, Connecticut 06457 USA
Telephone (860) 346-0896
FAX (860) 346-1540
Madrigal provides an owner-transferable, five year limited warranty on all
Mark Levinson products within the U. S. and Canada ONLY. Warranty and
service policies outside the U. S. and Canada are set by the local, authorized
distributor and are applicable in the country of purchase ONLY. Madrigal
products are designed to operate at set voltages appropriate for the country
of sale and may be damaged if operated at the wrong voltage.
100V, 120V, 200V, 220V, or 240VAC @ 50/60Hz
2 stereo balanced (Swiss XLR female)
4 stereo single-ended (Madrigal RCA female)
1 1 ⁄ " mini-jack for external IR repeater
8
2 stereo record outputs (Madrigal RCA female)
1 stereo balanced main out (Swiss XLR male)
0.1 dB steps above 38.8 in display (-34 dB),
gradually increasing step size at lower levels
greater than 16V (0 dB output)
40W maximum
See "Dimensions"
35 lbs. (16 kg)
-72.1 dB to +18.9 dB
100k shunted by 680pF
less than 6
16V rms, balanced
35