Table of Contents
Advertisement
Securing Car Seat in Your Vehicle
10.0
10.6 Car Seat Only Installation without Base
WARNING!
• VEHICLE SEAT BELT MUST BE PROPERLY ROUTED AND
REMAIN TIGHTLY ADJUSTED AROUND CAR SEAT AT ALL
TIMES. IF VEHICLE BELT DOES NOT STAY TIGHT, READ
VEHICLE OWNER'S MANUAL AND "VEHICLE SEAT BELT
REQUIREMENTS" SECTION IN THIS MANUAL."
• PROPER RECLINE ANGLE FOR SEAT BACK RECLINE IS
REQUIRED. FOLLOW THE INSTRUCTIONS FOR ADJUSTING
RECLINE ANGLE USING SEAT ANGLE INDICATOR.
- TOO UPRIGHT CAN CAUSE A YOUNG INFANT'S HEAD
TO FALL FORWARD AND RESTRICT BREATHING.
- TOO RECLINED CAN CAUSE EJECTION IN A SUDDEN STOP
OR CRASH.
• TOYS OR OTHER OBJECTS ATTACHED TO CARRY HANDLE CAN
CAUSE INJURY IN A CRASH. NEVER ATTACH TOYS OR OTHER
OBJECTS TO HANDLE WHEN IN VEHICLE.
10.6.1 Initial Positioning
1. Follow instructions in Section 10.1
Preparation for Installation in Vehicle.
2. If vehicle seat back is adjustable, adjust
into the upright position or the position or
the position specified in the vehicle owner's
manual for use with a Car Seat.
43
Securing Car Seat in Your Vehicle
10.0
3. Place the Car Seat in the rear-facing position
in a forward facing vehicle seat as shown in
(Fig 44-1). The Child must face the rear of
the vehicle and Car Seat must be placed in a
vehicle seat that faces forward.
4. Check for the correct seat recline and adjust
recline as necessary. (Fig 44-2) (See Section
11.4 Adjust Seat Recline Angle.)
5. Remove any toy or other objects attached to
carry handle before installing car seat in vehicle.
10.6.2 Securing Car Seat WITH Vehicle
Combination Lap/Shoulder Belt
1. To attach Car Seat with Vehicle
combination Lap/Shoulder Belt: Slide the
lap portion of the vehicle lap/shoulder
belt into the Vehicle Belt Path openings,
buckle vehicle seat belt, and place
vehicle shoulder belt against vehicle
seat back (Fig 44-3).
44-1
(10 kg) and
(10 to 14.5 kg)
44-2
44-3
44
44
Hide quick links:
Advertisement
Table of Contents
