13.1 Care & Maintenance ..................57 10.0 Securing Car Seat in Your Vehicle .............32 13.2 Using Your Car Seat with a Baby Trend Stroller ..........61 10.1 Preparation for Installation in Vehicle ..............32 13.3 Airplane Use ....................... 61 10.2 Base Installation with UAS System ..............33 13.4 Replacement Parts .....................
General Warnings General Warnings The ultimate safety of your child depends on the proper and secure WARNINGS TO PARENTS AND CAREGIVERS installation of the Car Seat in your vehicle. Proper installation requires that you read and understand this entire manual and WARNING your vehicle’s owner’s manual before placing your child in the seat.
Send your name, address, email address if available, and the restraint’s model number and manufacturing date to: Baby Trend, Inc., 1607 S. Campus Avenue, Ontario, CA 91761 or call 1-800-328-7363 or register online at: http://www.babytrend.com/ registration.html.
Features and Benefits Features and Benefits 3.1 Carrier WITH Harness System 3.1.1 Rear view of Adjustable Back Model Harness Slots Carry Handle Canopy Adjustable Back Canopy (Adjustable Back Model Only) Adjuster Knob Seat Pad Seat Angle Indicator Handle Harness Release Strap Harness Button...
Page 6
Features and Benefits Features and Benefits • Before lifting the Car Seat, push on the Carry Handle handle to check that both sides of the handle have locked into Carry position. WARNING Build-in Safety Harness • Toys or other objects attached to carry handle can cause Front adjust 5-point Safety Harness, adjust the injury in a crash.
Features and Benefits Features and Benefits Seat Angle Indicator 3.2 Base The Seat Angle Indicator is used to ensure that the seat is installed at the proper degree of recline to adequately protect your child in a crash. Use Seat Angle Indicator to adjust seat recline when installing car seat WITH and WITHOUT Base.
Features and Benefits Preparing Car Seat for Use Your Car Seat base can be installed with either the 4.1 Assembling the Car Seat UAS anchorage system or with a vehicle belt. Attaching the Canopy When available, UAS is the recommended method of securing the Car Seat in the vehicle.
Height and Weight Limitations Important Safety Information WARNING! WARNING! DEATH or SERIOUS INJURY can occur DEATH or SERIOUS INJURY can occur: - Proper use is required Failure to follow these instructions and Car Seat labels can result in child striking the vehicle’s interior during a sudden stop or crash. •...
• DO NOT use accessories or parts other than those provided the vehicle. by Baby Trend, Inc. Use of accessories or parts from other - UAS attachment or vehicle seat belt must be secured, tightly manufacturers could alter the performance and safety of the Car adjusted, and stay tightly adjusted around car seat.
Base from any other manufacturer. If you are in need of an • SUFFOCATION HAZARD: Infant carrier can roll over on soft additional Base, please contact your local dealer or Baby Trend to surfaces and suffocate child, NEVER place carrier on beds, obtain one.
Important Safety Information UAS Anchorage System WARNING! UAS ANCHORAGE SYSTEM To avoid death or serious injury from suffocation, falls The Universal Anchorage System (UAS) is designed to make and other hazards: installation of child Car Seats in motor vehicles easier by •...
Selecting a Vehicle Seat Location Vehicle Seat Belts or the owner’s manual does not address child Car Seat installation, 8.2 Check that the Vehicle Seat Meets the Following please contact the vehicle manufacturer to obtain this information Requirements before using this Car Seat. WARNING VEHICLE SEAT BELT REQUIREMENTS DO NOT place rear-facing child...
Page 15
Vehicle Seat Belts Vehicle Seat Belts is fastened, the latch plate prevents the secure installation and all instructions provided by lap belt from loosening. This combination your vehicle owner’s manual, are followed. seat belt does not require a Locking Clip. Lap Belts (Manually Adjusted) Note: The belt is tightened by pulling A lap belt that is manually adjusted and...
Vehicle Seat Belts Vehicle Seat Belts 9.2 Locking Clip Installation 9.3 UNSAFE Vehicle Seat Belt Systems Locking Clip is stored under seat pad on the right side of the DO NOT use the following types of seat belt systems with the Car Seat. Car Seat.
Vehicle Seat Belts Securing Car Seat in Your Vehicle 10.0 at one end. This type of seat belt system will not 10.1 Preparation for Installation in Vehicle adequately restrain the Car Seat. (Fig 30-2) When available, UAS is the recommended method Passive Restraint –...
Securing Car Seat in Your Vehicle Securing Car Seat in Your Vehicle 10.0 10.0 3. Check again for any Active Frontal Air bags. DO NOT use any • NEVER CONNECT MORE THAN ONE UAS CONNECTOR TO A location that has an active frontal air bag or is adjacent to an VEHICLE LOWER ANCHOR UNLESS SPECIFICALLY ALLOWED IN Active Air bag such that, when deployed, the Active Air bag VEHICLE OWNER’S MANUAL.
Securing Car Seat in Your Vehicle Securing Car Seat in Your Vehicle 10.0 10.0 6. Slide the UAS belt into the Vehicle Belt Path 10.2.2 Secure Base with UAS Lower Connectors openings on the side of the base (1) and under 1.
Securing Car Seat in Your Vehicle Securing Car Seat in Your Vehicle 10.0 10.0 1 inch (2.54 cm). (Fig 37-1) If you find that Connectors (Fig 37-2) and pull base away the UAS loosens or that the or the base from the vehicle anchors.
Securing Car Seat in Your Vehicle Securing Car Seat in Your Vehicle 10.0 10.0 2. Store UAS Connectors in the storage location on 10.3.2 Secure Base WITH Vehicle the bottom of the base. (Fig 39-1) Combination Lap/Shoulder Belt 3. If vehicle seat back is adjustable, adjust into the 1.
Base if it does not securely lock onto the Base. Please call position you have selected is adequate and Baby Trend at 1-800-328-7363 for assistance. check that you have completed all of the steps 5. Check that car seat is in the correct recline position based in this section.
Securing Car Seat in Your Vehicle Securing Car Seat in Your Vehicle 10.0 10.0 3. Place the Car Seat in the rear-facing position 10.6 Car Seat Only Installation without Base in a forward facing vehicle seat as shown in (Fig 44-1). The Child must face the rear of WARNING! the vehicle and Car Seat must be placed in a •...
General Warnings Securing Car Seat in Your Vehicle Securing Car Seat in Your Vehicle Registration Information 10.0 10.0 loosen at all and that the vehicle seat belt is fastened very tightly 10.6.3 Securing Car Seat WITH around the Car Seat. (Fig 45-3) If you find that the vehicle seat Vehicle Lap Belt only belt loosens or that the seat easily moves or rotates downward, 1.
11.1 Securing Your Child with Harness System or padding under harness straps or child unless provided by WARNING! Baby Trend. • Do not use Car Seat with harness straps loose or unbuckled. DEATH or SERIOUS INJURY can occur: Harness straps MUST be snug and positioned over shoulders and thighs of child.
Harness System Use and Adjustment Harness System Use and Adjustment 11.0 11.0 3. Unbuckle Harness Buckle by pressing 7. Check buckle height - The Crotch button and sliding buckle tongues up and Strap should be adjusted so that out of buckle. (Fig 49-1) a gap of 12.5 mm to 25 mm (1/2”...
Harness System Use and Adjustment Harness System Use and Adjustment 11.0 11.0 - Knob must remain in vertical position Knob handle must Removing Your Child from Harness System be vertical after adjustment. (Fig 52-1) DO NOT 1. Open Harness Clip by pressing button and sliding apart. use the Car Seat with the Harness 2.
Harness System Use and Adjustment Harness System Use and Adjustment 11.0 11.0 1. Lift up on the crotch strap pad and you will see 11.4 Adjust Seat Recline Angle the crotch strap anchor clip riding in a slot in the crotch strap cavity in the car seat shell. WARNING! Pull outward on the metal clip, while feeding the crotch strap webbing downward, until the...
Page 29
Harness System Use and Adjustment Harness System Use and Adjustment 11.0 11.0 Car Seat with Base: Car Seat without Base: • Place Base on vehicle seat and lock car • Place car seat onto vehicle seat. Check that seat onto base. Check that the car seat is car seat is level side to side.
Final Safety Check Additional Information 12.0 13.0 Seat Pad and Head Support Pad: For care and maintenance, read 12.0 FINAL SAFETY CHECKS and follow instructions on fabric tags. 1. If your child is already in the Car Seat, check that the harness is To remove Seat Pad / Head Support Pad: properly fitted and snugly adjusted as instructed in the section 11.1 1.
Additional Information Additional Information 13.0 13.0 WARNING! until you have enough strap to reach the Belt Adjuster Plate. (Fig 60-1) • DO NOT use the Car Seat Without the Seat Pad. 6. Reassemble the Harness Straps to the Belt To install Seat Pad / Head Support Pad: Adjuster Plate.
Additional Information 13.0 13.0 13.2 Using Your Car Seat with a Baby Trend Stroller 13.4 Replacement Parts If You Need Help or Replacement Parts, please call our Please see the stroller owner’s manual for information on the use of the Customer Service Department at 1-800-328-7363 between the Car Seat with the Baby Trend stroller.
Need help?
Do you have a question about the EZ Flex-Loc 32 and is the answer not in the manual?
Questions and answers