Left-Side Panel Components - Fujitsu E Series User Manual

L i f e B o o k E S e r i e s – S e c t i o n T w o
Communications Port
DC Power Jack

LEFT-SIDE PANEL COMPONENTS

Following is a brief description of your notebooks
left-side components.
DC Power Jack
The DC power jack allows you to plug in the AC adapter
or the optional Auto/Airline adapter to power your note-
book and charge the internal Lithium Ion Battery.
(Figure 2-4)
Communications Port
The communications port may be configured with
either a Modem (RJ-11) telephone jack for an internal
56K modem or an Internal LAN (RJ-45) jack for an
internal Fast Ethernet (10/100 Base-T/Tx) port.
(Figure 2-4) (See Communications Port on page 67 for
more information)
C A U T I O N
The internal modem is designed to the ITU-T V.90
standard. Its maximum speed of 53000bps is the
highest allowed by FCC, and its actual connection rate
depends on the line conditions. The maximum speed is
33600bps at upload.
C A U T I O N
The internal modem is not intended for use with Digital
PBX systems. Do not connect the internal modem to a
digital PBX as it may cause serious damage to the
internal modem or your entire notebook. Consult your
PBX manufacturer's documentation for details. Some
hotels have Digital PBX systems. Be sure to find out
BEFORE you connect your modem.
12
PC Card Slot
Reset Switch
Figure 2-4 LifeBook E Series notebook left-side panel
Anti-theft Lock
PC Card Eject Buttons
C A U T I O N
The internal modem on all Fujitsu notebooks from
Fujitsu PC Corporation are certified for use in the
United States and Canada. The modem may be
certified in other countries. Please access our Web site
at www.8fujitsu.com for a list of the other world-wide
locations where the internal modem has been certified.
Reset Switch
The reset switch allows you restart your notebook.
(Figure 2-4)
PC Card Slots
The PC Card Slots allow you to install two Type II
PC Cards or one Type III PC Card. (Figure 2-4)
(See PC Cards on page 63 for more information)
Anti-theft Lock Slot
The anti-theft lock slot allows you to attach a optional
physical lock down device. (Figure 2-4)
Internal Hard Drive Release Button
The internal hard drive release button allows you to
remove the internal hard drive. The release button will
not work if a Anti-theft lock is installed. (Figure 2-4)
Infrared Port
The fast IrDA compatible port allows you to communi-
cate with another IrDA compatible infrared device
without a cable. (Figure 2-4)
Infrared Port
Internal Hard Drive
Release Button