Simplicity Moxie Owner's Manual page 10

Using the Full Size Power Nozzle
Carpet Height Adjustment Tips: When using
the power nozzle, start on the "Auto" setting.
If pushing the power nozzle feels difficult, then
adjust to a higher setting. If the power nozzle
feels very easy to push, you may want to lower
the power nozzle for more effective cleaning.
The "Auto" setting is the recommended setting
for hard floor surfaces (i.e. tile, vinyl, wood).
Warning Light/Dirt Sensor
Your power nozzle is equipped with a circuit
breaker safety system that protects it from a
jammed situation. Common items that cause
jammed brushrolls include socks, excessive
threads, corners of area rugs, etc. The warning
indicator light on top of the unit will change from
green to red should this condition occur.
Dirt Sensor - Gusto Model Only
The warning light will change to orange if the
dirt sensor detects dirt in the carpet and will
change to green when the carpet is clean.
If the circuit breaker trips:
• Turn off the vacuum cleaner and power nozzle
then unplug the power cord.
• Remove the object preventing the brushroll
from turning.
• Locate the circuit breaker switch on the back
of the power nozzle and press it to reset the
breaker. When the unit is turned back on, the
warning light should be green.
If the breaker trips again, repeat these steps
again to correct the problem. If this does not
correct the problem, contact your authorized
Simplicity Vacuum retailer for further assistance.
10