Sony DCR-TRV380 Service Manual page 9

Self-diagnosis Code
Block
Function
E 6 1
E 6 1
E 6 2
E 6 2
DCR-TRV380/TRV480/TRV480E
Detailed Symptom/State
Code
Difficult to adjust focus
0 0
(Cannot initialize focus.)
Zoom operations fault
1 0
(Cannot initialize zoom lens.)
Steadyshot function does not work well.
0 0 (With pitch angular velocity sensor output
stopped.)
Steadyshot function does not work well.
0 1 (With yaw angular velocity sensor output
stopped.)
Inspect the lens block focus reset sensor (Pin qs of CN1551 of
VC-345 board) when focusing is performed when the control dial
is rotated in the focus manual mode and the focus motor drive circuit
(IC1554 of VC-345 board) when the focusing is not performed.
Inspect the lens block zoom reset sensor (Pin qg of CN1551 of
VC-345 board) when zooming is performed when the zoom switch
is operated and the zoom motor drive circuit (IC1554 of VC-
345board) when zooming is not performed.
Inspect pitch angular velocity sensor (SE752 of SI-041 board)
peripheral circuits.
Inspect yaw angular velocity sensor (SE751 of SI-041 board)
peripheral circuits.
1-5E
Correction