Quick Setup - LOTOS LTP5000D User Manual

Lotos Technology LTP5000D

Quick Setup

Instructions
Power plug wiring identification:
For either 110 or 220VAC, the GREEN wire with the yellow strip is ground wire. The other two
wires are hot wires.
Figure 1.1
2. Connect the machine gas inlet (on the back of the machine, Figure 1.2 ) to an air compressor
(Figure 1.3 & 1.4) and set the air pressure to 65 - 70 PSI. (The air regulator is optional as some air
compressors provide air pressure control capability).
Power
Cord
1. Wear a proper hel met (Figure 1.1) to protect your eyes from
harmful plasma cutting arc radiation. Wear safety gloves to
protect your hands during operation.
65 - 70 PSI
Gas
Inlet
Output
from
Figure 1.2
Air
Compressor
®
Figure 1.3
Gas
Inlet
Figure 1.4
1