11
DISASSEMBLE INSTRUCTIONS
10. Disassembling the side frame by releasing
11. Disassemble the housing of motor,
12. Releasing the dispenser by unscrewing
DISPENSER
40
4 screws
compressor, heater and thermistor.
Heater thermistor (WH Small 2pin)
Heater housing (WH Big 2pin)
Motor housing (WH 3pin)
Compressor housing (BLUE 3pin)
1 screw.
Note
If the hose is assembled unsuitable
"empty water" error message will be
indicated on the LED or LCD display.