LG RC9055*P*Z Service Manual page 34

10
DIAGNOSTIC TEST
Test 11
※Check the status of the actions Sensor
- Drum Light + Buzzer 3 when entering
Pressing enter, Once again press the same key
fot three seconds to escape.
- Turn the Jog Dial in data view state data can be
checked as shown below.
- Not to enter the Child lock status.
- Apply the model : Only Touch LED model.
NO The course Show details
1 Refresh Humidity values
2 Skin Care Low Temp
3 Jeans Comp Temp
4 Bulky Item T_heater (High Thermistor)
5 Easy Care Eva in Temp
6 Mixed Fabric
7 Cotten
8 Sports Wear Sump Water Level
9 Quick Dry Drain Pump RPM
10 Delicate LEV Pulse
11 Wool Main PGM Tool
12 Rack Dry Main Version
3. Convert LCD Display to Data View Mode.
4. After Start, when the first Pumping is completed, put 1/3 water in Drawer, and pour around
Dispenser water discharge hole slowly until "Sump W" value becomes "001" among
Data View categories.
(When it becomes "001", water supply shall be stopped immediately.)
5. Check electric parts , mechanical parts, hose connection in the left bottom and water
leakage at the bottom of Base.
( Refer to page41 )
( Refer to picture E , page35 )
( Refer to picture F , page35 )
-. Pump Cover assembly status
(Gap, Screw missing, etc.)
34