Changing The Display Information - Kenwood DDX7015BT Instruction Manual

HD Radio™ tuner HD Radio™ tuner
Operation buttons
Displays the easy control screen.
[ ]
(Page 10)
[AM] Selects the AM band.
[FM]
Selects the FM band.
[S] Searches for a station.
[T] • The search method differs according to
the selected seek mode. (See below.)
Selects a sub-channel when receiving an
[CHK]
[CHJ] HD Radio multicast channel.
[ ] Displays other operation buttons.
• Disabled when there are no other
buttons.
[MODE] Changes the settings for HD Radio tuner
reception on the <Mode> screen. (See the
right column.)
[TI]* Activates/deactivates TI standby reception
mode. (See the far right column.)
[AME ] Presets stations automatically. (Page 33)
[SEEK] Changes the seek mode.
• AUTO1: Auto Search
• AUTO2: Tunes in stations in the
memory one after another.
• MANU: Manual Search
[ ]
Displays/hides the information of the
current station. (See the right column.)
[PTY]*
Enters PTY search mode. (Page 33)
Displays the <Preset List> screen.
[ ]
(Page 33)
[MENU] Displays the <TOP MENU> screen.
* Appears only when FM is selected as the source.
32

Changing the display information

The preset list containing the station names is
displayed.
• Press [ ] again to display the text information
for the station currently being received.
Changing the HD Radio reception mode
While receiving an HD Radio broadcast, the unit
tunes to digital or analog audio automatically
according to the receiving condition.
1
2
H I
Press [ ] [ ] to change the mode.
<Auto> Switch between digital and analog
audio automatically.
<Digital>
Select this to tune to digital audio
only.
<Analog> Select this to tune to analog audio
only.
Activating/deactivating TI Standby
Reception
The unit is in standby to switch to Traffic Information
(TI) if available. (The TI indicator lights up in white.)
• If the TI indicator is lit in orange, tune into another
station.
To deactivate TI Standby Reception: Press [TI].
(The TI indicator turns off.)
• The volume adjustment for Traffic Information is
automatically memorized. The next time the unit
switches to Traffic Information, the volume is set
to the previous level.