Output Breaker Closed
Maintenance Breaker Closed
Maintenance Breaker Open
Inverter Breaker Open
Inverter Breaker Closed
Battery Breaker Open
Battery Breaker Closed
UPS Off
UPS On
New Alarm
Buzzer Off
General Alarm
General Alarm Off
Overtemperature
Temperature Ok
Output Bad
Output Okay
Overload
No More Overload
Bypass Bad
Bypass Ok
UPS Shutdown Canceled
UPS Shutdown
Charger Fault
Charger Ok
System Off
System Off Canceled
Bypass On
Bypass Off
124
Output breaker closed. Load will be supplied.
Maintenance breaker closed (active). Load will be supplied through the
grid directly.
Maintenance breaker open (inactive). Load will be supplied via the UPS.
Regular UPS protected operation.
Inverter breaker open. Load is not UPS protected!
Inverter breaker closed. Load will be supplied via the inverter. Normal
condition.
Battery breaker open. No battery buffering active!
Battery breaker closed. OK, normal condition.
UPS off
UPS on
New alarm, buzzer was activated.
Buzzer off
An alarm has occured. Alarm LED at the UPS is flashing.
No more alarm is active. Alarm LED at the UPS is off.
Overtemperature of the UPS
Temperature of the UPS is back in normal range.
UPS output failure (e. g. voltage, frequency)
UPS output OK
UPS overload, reduce load otherwise the UPS shutdown is pending
No more overload
Bypass failure at input (e. g. voltage, frequency)
Bypass Ok
UPS shutdown canceled
UPS shutdown initiated
Charger fault
Charger Ok
UPS output will be switched off or rather is off
UPS output switching off canceled
Bypass on
Bypass off