Honeywell Captuvo SL42 Quick Start Manual page 12

Scan Demo
You may test scanning a bar code using two methods.
Out-of-the-Box Method
1. Press and hold either of the scan buttons for three seconds.
2. Open the iOS "Notes" application or other iOS application with
data entry input fields.
3. Place the cursor in a data entry field within the application.
4. Scan a bar code. The bar code data should generate in the
designated data entry input field.
Note: To conserve battery power, this mode times out after 5
minutes of non-use. You may optimize or cancel this mode by
using the SDK.
Honeywell Price Check Method
1. Download the Honeywell Price Check application from the Apple
App Store
2. Scan a bar code.
Note: This application is for demonstration purposes only and does
not process any data.
SM
.