Table of Contents
Advertisement
OPERATING CONDITIONS
Environmental conditions: The machine needs to be installed inside a well lighted and aired building, on a
solid and levelled support. Temperatures from 41
Lighting: The light at worker disposal has to be suitable to accomplish the performed work, should be in
accordance with regulations and sufficient to read the controls and danger signals. The light should not
obstruct the operator's vision or impair it in any way.
Vibrations: Under proper conditions of use, vibrations are not strong enough to cause dangerous
situations
Sound emissions: 70 dbA during standard use
Electromagnetic environment: The machine is produced to work properly in an electromagnetic
environment of industrial type.
Environments exposed to the risk of explosion: an atmosphere open to be transformed in an
explosive atmosphere due to the local and/or working conditions is defined potentially
explosive atmosphere.
The machine has not been manufactured to work in environments with potentially explosive
atmospheres.
IDENTIFICATION OF THE MACHINE
In the back part of the machine there is a plate like the one you can see below here. That plate shows the
details of the manufacturer, the type of machine, the registration number, the electrical characteristics,
frequency, absorbed power and number of phases, and the year of manufacture.
3 OLD ROCKINGHAM ROAD, SALEM, NH 03079
TEL. 1-603-893-6191
MODEL
Serial Number
Date of Manufacture
Voltage/HZ
kW
INSTALLATION
The machine has to be placed in a vertical position, on a level surface with sturdiness suitable for the
load. DO NOT OPERATE MACHINE WITHOUT LEVELING FEET IN PLACE! Leveling feet need to
be adjusted down, such that the unit is level.
o
o
F to 104
F (5°C to 40°C) with humidity not over 90%.
FAX 1-603-893-1249
www.univexcorp.com
Phases
5 of 11
Advertisement
Table of Contents
