Cleaning And Maintenance - Univex T50 Operator's Manual

CLEANING and MAINTENANCE

Use a mild detergent and warm water to clean the outside of the T50, scrapers, upper chute and rolling pins.
Do not use direct spray or hose to wash this machine! Do not use liquids to clean the mats as they
will ruin the felt. The belt can be dusted with a soft bristle brush. It is a good idea to leave flour on the
mats to keep dough from sticking to the belt. Any damage as the result of water entering the unit due to
direct spray or immersion of the mats will void all warranties.
There is no need of any particular maintenance operation. All moving parts should be lubricated every 4 to 6
months. (use, for example BECHEM type BELORUB FB19). Keep the machine clean to avoid that any flour
deposits on the moving parts creating troublesome creaking and irregular wear and tear.
DO NOT CARRY OUT ANY MAINTENANCE OR CLEANING WITH THE ELECTRICAL CURRENT ON.
Scrapers cleaning
To take out the scrapers, disconnect the tension springs from the machine (1) and remove the front grid,
lifting the bolts (2).
1
2 2
Press the spring at the left end of the scraper (3) and extract the opposite end. Do the same for the scraper
inside
3
Inner scraper
10 of 11