Baseumt - Sony CDP-CX70ES Service Manual

PULLY AND DISC CENTER HOLE ALIGNMENT
(1) Rotate the cam and adjust to the positiOn
shown
m
the-figure.
(2) Check that the state
IS
as shown
in the figure.
Note:
The disc should not
be fixed.
DISC
05-2mm
Cam
Baseumt
Magnet assembly
L__ _ _ _ _ _ _ _ _ _ _ _
___J
D1scpul/ey
Holer (diSC A2)
I
0---
Magnet assembly
(3) Remove the Magnet assembly.
F1xedscrew
Tapermg screwdriVer
( 4) Loosen the fixed screw by 60° to 90°, and move and adjust the
bracket (BU adjustment) up and down using a tapering screw-
dnver so that the positions of the disc hole and disc pulley be-
come A=B or between A:B=2: 1 and 1:2.
-24-