JVC KW-NT500HDT Instructions For Use Manual page 90

Setting the Sound
5
Touch or next to <Size> to set the
size of the speaker.
If the size is unknown, select <6-1/2">.
If there is no speaker, select <None>.
• <None> (without speaker) cannot be set for
the size of the front speaker.
6
Only for the front speaker, touch
next to <Tweeter> to set the size of the
tweeter.
• When <Size> is set to <None> for the
subwoofer, Crossover cannot be adjusted for the
subwoofer.
• When <Size> is set to <None> for the rear
speaker, Crossover cannot be adjusted for the
rear speaker.
To change the crossover frequency of the
speakers:
Set the crossover frequency between the front/rear
speakers and the subwoofer, slope (attenuation rate)
and phase of the subwoofer.
1
or
2
Touch the button for the speaker where you
want to change the crossover frequency.
3
Touch
(or rear) speaker and subwoofer.
90
or to set each item of the front