Remote Control - LG 42SH7DB Owner's Manual

REMOTE CONTROL

The descriptions in this manual are based on the buttons on the remote control. Please read this manual
carefully to use the monitor correctly.
To install batteries, open the battery cover, place batteries (1.5 V AAA) matching
labels inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the actual
accessories.
CAUTION
• Do not mix old and new batteries, as this may
damage the remote control.
• Be sure to point the remote control toward the
remote control sensor on the monitor.
BACK
TILE
ID
ON OFF
(POWER)
MONITOR ON
MONITOR OFF
ENERGY SAVING(
INPUT
Selects the input mode.
3D
Used for viewing 3D videos. (This model does not support this.)
1/a/A
Toggles between numerical and alphabetical.
(Depending upon the model, this feature may not be supported.)
Number and Alphabet buttons
Enters numerical or alphabetical characters depending upon the setting.
(Depending upon the model, this feature may not be supported.)
CLEAR
Deletes the entered numerical or alphabetical character.
(Depending upon the model, this feature may not be supported.)
Volume Up/Down Button
ARC
Selects the Aspect Ratio mode.
AUTO
Automatically adjusts picture position and minimizes image
instability (available for RGB input only). (Depending upon the
model, this feature may not be supported.)
MUTE
Mutes all sounds.
BRIGHTNESS
EXIT
Turns the monitor on or off.
Turns the monitor on.
Turns the monitor off.
)
Adjusts the brightness of the picture to reduce
energy consumption.
Adjusts the volume.
Adjust the brightness by pressing the Up and Down
buttons on the remote control. In USB mode, the OSD
menu has the Page function to move to the next file list.
(Depending upon the model, this feature may not be
supported.)
and terminals to the
15