Daisy Chain Monitors - LG 42SH7DB Owner's Manual
Digital signage (monitor signage)
Hide thumbs
Also See for 42SH7DB:
- Owner's manual (71 pages) ,
- Quick start manual (8 pages) ,
- Easy setup manual (8 pages)
Table of Contents
Advertisement
20
Daisy Chain Monitors
To use different products connected to each other, connect one end of the signal input cable (DP Cable) to the
DP Out connector of Monitor 1 and connect the other end to the DP In connector of the other product.
* DP Cable - Use a DP cable that is certified to DP1.1a (SST) or higher.
NOTE
•
If the signal is stable and there is no cable loss, in general, up to 100 monitors can be connected via the DP
Out port (at the recommended resolution). If you want to connect more than this number of monitors, use
a booster.
•
If you set the tile mode using DVI or HDMI, you will not be able to watch HDCP-encrypted content.
•
If the signal cable between the product and your PC is too long, make sure to use the Booster or optical
cable.
Monitor 1
Monitor 2
Monitor 3
Monitor 4
Advertisement
Table of Contents
