Connections (Notifications); Remote Control - LG 32MN58HM Owner's Manual

Connections (Notifications)

Connect various external devices to the monitor and switch input
modes to select an external device. For more information about an
external device's connection, refer to the manual supplied with each
device. Available external devices are: HD receivers, DVD players,
VCRs, audio systems, USB storage devices, PC, gaming devices, and
other external devices.
NOTE
• For the best picture quality, connect the external device and the
monitor with the HDMI cable.
• The monitor may flicker when turned on in an area where the
temperature is low. This is normal.
• Sometimes red, green, or blue spots may appear on the screen.
This is normal.
• Do not press the screen for a prolonged time. This may cause
image distortion.
• Do not display a still image on the screen for a prolonged time.
This may cause image retention. Use a screensaver if possible.
• The external device connection may differ from the model.
Connecting to a PC
NOTE
• If you want to use HDMI-PC mode, you must set the Input Label
to PC mode.
• The setting can be changed in SETTINGS ➾ OPTION ➾ Input
Label.
Other connections
Some separate cable is not provided.
For the best picture and audio quality, connect the external device
and the monitor with the HDMI cable.
• USB port supports 0.5 A electric current. If you need more electric
current in case of HDD, use the separate power adaptor.
10

Remote control

The descriptions in this manual are based on the buttons on the
remote control.
Please read this manual carefully and use the monitor correctly. To
replace batteries, open the battery cover, replace batteries
(1.5 V AAA) matching the and ends to the label inside the
compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
• Do not mix old and new batteries, as this may damage the remote
control.
• This remote uses infrared light. When in use, it should be pointed
in the direction of the monitor's remote sensor.
A
(Power) Turn the power on or off.
Resizes an image.
Changes the input source.
B
Adjusts the volume level.
Select the desired contents file in the USB device.
Mutes all sounds.
Moves to the previous or next screen.
A
B