Konftel 300 Application Notes page 4

2. Equipment and Software Validated
The following equipment and software were used for the sample configuration:
Avaya S8300 Server /
Communication Manager
Avaya G350 Media Gateway
Avaya G350 Analog Interface
Avaya MM712AP DCP
Avaya 2410 Digital Telephone
Avaya 4620 SIP Telephone
Avaya 9640 H.323 Telephone
Avaya IA 770 INTUITY AUDIX
Konftel 300
Table 2: Version Numbers of Equipment and Software
3. Configuration
3.1. Configuration of the Avaya S8300 Media Server
The configuration and verification operations illustrated in this section were performed using the
Avaya Communication Manager System Administration Terminal (SAT).
Although the Avaya IA 770 INTUITY AUDIX voicemail system was used for testing, the
configuration of this component is outside the scope of this document.
The configuration of the Avaya Communication Manager interface to the PSTN is outside the
scope of this document.
3.1.1. Configure Dial Plan
Use the change dialplan analysis command to specify that dialed strings which begin with "3"
are extensions. The "*7" entry is used by the feature codes described in Table 5.
change dialplan analysis
Dialed Total
String Length Type
3 5
*7 4
MRR; Reviewed:
SPOC 5/1/2008
Equipment
DIAL PLAN ANALYSIS TABLE
Call Dialed Total
String Length Type
ext
fac
Figure 3: Dialplan Analysis Form
Solution & Interoperability Test Lab Application Notes
©2008 Avaya Inc. All Rights Reserved.
Software Version
5.0 (R015x.00.0.825.4)
27.26.0
HW06 / FW089
HW05 / FW009
2.2.2
N5.0-12.0
1.8.469 EU
Page
Percent Full:
Call Dialed Total
String Length Type
5.0
1.5
1 of 12
1
Call
konftel300-CM
4 of 10