Table of Contents
Advertisement
3. This product must be connected to an electrical supply 100‐240V ~
50/60Hz.
4. The plus must be accessible after installation.
5. Hold the plug well when you plug the power cord in or out.
6. Please do not put the AC power cord near any heat source equipment.
7. Please do not place any heavy objects on the AC power cord.
8. Please do not overhaul the AC power cord.
9. This product contains a low power laser device. In order to keep safety,
please do not open the unit to expose the inside parts. If there is some
problem need to be repaired, please let the professional people check and
repair it.
CAUTION
1. Use of controls and adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
2. If this product develops trouble, contact qualified service centers, and do not
use the product in defective states.
BEFORE USE
1. Choose unit installation location carefully. Avoid placing it in direct sunlight
or close to a source of heat. Also avoid locations subject to vibrations and
excessive dust, cold or moisture. Keep away from sources that hum, such as
transformers or motors.
2. Do not open the cabinet as this might result in damage to the circuitry or
electrical shock. If a foreign object should get into the set, contact your
dealer.
3. When removing the power plug from the wall outlet, always pull directly on
the plug, never pull the cord.
4. Do not attempt to clean the unit with chemical solvents as this might damage
the finish. Use a clean, dry cloth.
5. In order to shut off the power to this product completely, unplug the power
cord from the wall outlet. Be sure to unplug the unit if you do not intend to
use it for an extended period of time, such as while on vacation.
6. Keep this manual in a safe place for future reference.
5
Advertisement
Table of Contents
