Table of Contents
Advertisement
PLAYING AN EXTERNAL AUDIO SOURCE
An external (auxiliary) audio source (i.e., personal CD player or MP3 player) can
be connected to this unit.
The unit has 2 AUX INs at the back of the unit.
1. Plug one end of the AUX IN cable (included) into the AUX IN sockets at rear of
the unit. For AUX‐IN 2, always make sure the white plug is connected to the
white socket and the red plug in the red socket.
2. Plug the other end of the cable into the headphone or Line Out socket of the
external source.
3. Press the FUNCTION button repeatedly to select a respective AUX mode (
that you have connected.
4. Turn on the external audio source and adjust volume level.
5. Set the external audio source to normal play.
TROUBLESHOOTING GUIDE
If you have any trouble with the unit, please look through this chart and see if
you can solve the problem yourself before calling your dealer.
Problem
Power does not come
on when the unit is
switched on.
No sound comes out of
the speakers.
The sound is noisy.
The unit shuts down
suddenly and
LC‐display shows
nothing. Within a
minute only the
STANDBY indicator
resumes to illuminate.
Cause
Unit is unplugged.
The volume is
turned down (to
MIN).
The input selector
does not match the
playback source.
The unit is too
close to a TV set or
another similar
appliance.
The over‐load
protection is
functioning.
10
Solution
Connect the unit to the AC
power supply.
Adjust the volume.
Re‐select the desired input
source.
Turn off the TV or other
appliance, and re‐locate the
unit.
Reboot the unit by pressing
the STANDBY/ON button.
)
Advertisement
Table of Contents
