Bluetooth - Samsung HW-J355 User Manual

BLUETOOTH

You can connect a Bluetooth device to the Soundbar and enjoy music with high quality stereo sound, all
without wires!
▶ To connect the Soundbar to a Bluetooth device
Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.
1. Press the ( ) button on the main unit's top
panel or the (SOURCE) button on the
remote control to select the BT mode.
You will see BT READY on the front display of
●
the Soundbar.
2. Select the Bluetooth menu on the Bluetooth
device you want to connect. (Refer to the
Bluetooth device's user manual.)
3. Select the Stereo headset menu on the Bluetooth
device.
You will see a list of scanned devices.
●
4. Select "[Samsung] Soundbar J-Series" from the
list.
When the Soundbar is connected to the
●
Bluetooth device, it will display [Bluetooth
Device Name]  BT on the front display.
The device name can only be displayed in
●
English. An underline " _ " will be displayed if
the name is not in English.
If the Bluetooth device has failed to pair with
●
the Soundbar, delete the previous "[Samsung]
Soundbar J-Series" found by the Bluetooth
device and have it search for the Soundbar
again.
If the Soundbar is in another mode (except TV
●
mode), you can shift it to Bluetooth mode
using your smart device.
5. Play music on the connected device.
You can listen to the music playing on the
●
connected Bluetooth device over the
Soundbar.
In BT mode, Repeat functions are not
●
available. For some Bluetooth device, Play/
Stop/Next/Prev function are not available.
Bluetooth device
If asked for PIN code when connecting a
●
Bluetooth device, enter <0000>.
Only one Bluetooth device can be paired
●
at a time.
The AVRCP feature is supported.
●
Once you have turned off Soundbar and
●
the pairing is disconnected, the pairing
will not be restored automatically. To
reconnect, you must pair the device
again.
The Soundbar may not perform Bluetooth
●
search or connection correctly under the
following circumstances:
If there is a strong electrical field
-
around the Soundbar.
If several Bluetooth devices are
-
simultaneously paired with the
Soundbar.
If the Bluetooth device is turned off,
-
not in place, or malfunctions.
Note that such devices as microwave
-
ovens, wireless LAN adaptors,
fluorescent lights, and gas stoves use
the same frequency range as the
Bluetooth device, which can cause
electric interference.
The Soundbar supports SBC data
●
(44.1kHz, 48kHz).
Connect only to a Bluetooth device that
●
supports the A2DP (AV) function.
You cannot connect the Soundbar to a
●
Bluetooth device that supports only the
HF (Hands Free) function.
Once paired the device, on D.IN/AUX/USB
●
mode, select "[Samsung] Soundbar
J-Series" from the list will automatically
change to BT mode.
15
FUNCTIONS
Connect