Using A Wireless Connection To The Tv; Connecting Via Bluetooth - Samsung HW-Q6CB/ZA Full Manual

06 USING A WIRELESS CONNECTION TO THE TV

Connecting via Bluetooth

When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
• Only one TV can be connected at a time.
The initial connection
1. Press the PAIR button on the remote control to enter the "BT PAIRING" mode.
(OR)
a. Press the
"BT" changes to "BT PAIRING" in a few seconds automatically or changes to "BT READY" if
there is a connect record.
b. When "BT READY" appears, press and hold the
Soundbar for more than 5 seconds to display "BT PAIRING".
2. Select Bluetooth mode on the TV. (For more information, see the TV's manual.)
3. Select "[AV] Samsung Soundbar Q6B-Series" from the list on TV's screen.
An available Soundbar is indicated with "Need Pairing" or "Paired" on the TV's Bluetooth device
list. To connect the TV to the Soundbar, select the message, and then establish a connection.
• When the TV is connected, [TV Name] → "BT" appears on the Soundbar's front display.
4. You can now hear TV sound from the Soundbar.
• After you have connected the Soundbar to your TV the first time, use the "BT READY" mode to
reconnect.
If the device fails to connect
• If a previously connected Soundbar listing (e.g. "[AV] Samsung Soundbar Q6B-Series") appears in
the list, delete it.
• Then repeat steps 1 through 3.
(Source) button on the top panel and then select "BT".
BT PAIRING
(Source) button on the top panel of the
ENG - 24
OR