Table of Contents
Advertisement
➋
Iris
Auto mode or manual mode can be selected.
Auto: The brightness of the image signal can be adjusted
automatically depending on the amount of light.
Manual: The brightness of the image can be adjusted.
➌
Shutter
---: Electronic shutter mode is enabled. The shutter speed is
controlled automatically according to the brightness of the screen.
A.FLK: Use this mode when the screen flickers because of
inconsistent frequency with the surrounding lights.
Manual
- Select any function you wish to operate by using the UP and
DOWN buttons.
- Shutter speed can be adjusted from 1/60 second to 1/120,000
second.
- Sens-Up function can be operated manually from x2 ~ x128.
Note
Do not use this function with WDR of Back Light
menu at the same time for effective A.FLK
function.
If the Shutter mode is ESC in the inner
synchronization mode and the camera faces to the
bright fluorescent lamp directly, the image may be
unstable. Be careful to select the installation
location.
If the Manual or A.FLK mode is selected for the
Shutter menu, the Sens-Up function is disabled.
6.2. Camera Setting
103
Advertisement
Table of Contents
