User Interface/ Front Panel - OTO Biscuit User Manual

1.1 USER INTERFACE/ Front Panel (FIG1) 01

1.1 USER INTERFACE/ Front Panel

01
1 DRIVE : Input gain (from - to +15 dB) placed before the AD conversion. A diode clipper protects the converters
2 NAKED : Dry signal level (from - to 0 dB)
3 DRESSED : 8-bit signal level (from - to 0 dB)
4 Q : Filter Resonance
5 FILTER : Filter type. Switch colour indicates which type of filter is selected : Green is for Low-pass, Yellow for Band-pass and Orange for Hi-pass
6 FREQ : Filter cutoff frequency (from 20 Hz to 15kHz)
7 BRAIN : When BRAIN is off, the switches 1 to 8 are used for Biscuiting (cf Chap. 2). When BRAIN is Blue, the switches 1 to 8 are used for selecting FXs and
parameters. This switch is also used for recalling and saving Presets and to access the MIDI section
8 CLOCK : Sample Clock Frequency (from 250 Hz to 30 kHz). This pot is also used in the FX section to set parameters
9 BYPASS : True relay bypass. When the switch lights up green, BISCUIT is active. It turns orange when input signal is strong. When its light is off, BISCUIT is
inactive and input signal is directly routed to output jacks, with no electronics in between
10 - 1 to 8 : These switches have 2 main functions : muting or inverting the 8 bits and selecting FX type and parameters. They are also used for presets, MIDI
section and snapshots
6 7