Presets; Saving A Preset; Recalling A Preset - OTO Biscuit User Manual

22

4. PRESETS

You can save all the BISCUIT functions (pots position, switches, filter, by-
pass, fx) in one of the 16 presets.

4.1 SAVING A PRESET

While pressing the BRAIN switch, press the FILTER switch.
Keep pressing the BRAIN switch for 2 seconds.
22
The switches 1 to 8 flash red. Press one of the switches 1 to 8, all the
Biscuit functions will be saved in the corresponding preset.
24
23
Switches will then revert to the display of the 8 bits status.
To save the presets 9 to 16, do the same as explained above. When the 8
switches flash red, press the BRAIN switch again. The BRAIN switch turns
blue. 23 You can then save to one of the presets 9 to 16 by pressing one
of the switches 1 to 8.
24

4.2 RECALLING A PRESET

While pressing the BRAIN switch, press the FILTER switch.
24
The switches 1 to 8 flash white. Press one of the switches 1 to 8 to recall
the desired preset. Switches stop flashing. The selected switch will light
up for 2 seconds.
Switches then revert to the display of the 8 bits status.
To recall one of the presets 9 to 16, do the same as explained above.
When the 8 switches are flashing white, press the BRAIN switch again. The
BRAIN switch turns blue. You can now select one of the presets 9 to
23
16, by pressing the switches 1 to 8.
To exit the « saving a preset » or « recalling a preset » mode, press again
the FILTER switch while pressing the BRAIN switch, or wait for 10 seconds.
BISCUIT will revert to its regular state.
25