Snapshots; Potentiometers Position; Factory Presets - OTO Biscuit User Manual

25

4.3 SNAPSHOTS

You can save your 8 bits configuration in one of the 8 memory slots called
« Snapshot ».
Snapshots only save the 8 bits status. If you want to save all the BISCUIT
functions (pots, effects and parameters), use the Presets (cf Chap 4).
The 8 snapshots are independent from the presets.
SAVING A SNAPSHOT
While pressing the BRAIN switch, press the « 1 TAP » switch.
26
26
Keep pressing the BRAIN switch for 2 seconds.
25
The switches 1 to 8 flash red. You can now press one of the switches 1 to
8 to save the 8 bits status in the corresponding snapshot. The switches
revert to their regular states.
RECALLING A SNAPSHOT
While pressing the BRAIN switch, press the « 1 TAP » switch.
26
switches 1 to 8 flash white. You can now press one of the switches 1 to 8
to recall the corresponding snapshot. The switches stop flashing and revert
to their regular states.
27
1 2 3
LOVE 8 OLD COMPUTER BITS BENDING
5 6 7
NOISE ADDER STEP FAZOR RUSTY JAM
9 10 11
BROKEN DELAY CONTINENTAL NAUTILUS
13 14 15
DETUNE BECQUEREL DIRTY LEAD

4.4 POTENTIOMETERS POSITION

Once you recall a preset, the physical position of a pot may not be the
same as in the preset.
To prevent a sudden jump of volume after recalling a preset, the preset
value will reach the pot value in a smooth fade of 1 second.
If you want to know the original value of a pot in the preset you just re-
The called, keep pressing the BRAIN switch and move this pot. The BYPASS
switch turns blue when the pot reaches the preset value.
28
4
DARK SIDE
8
DELAY DELay delay
12
MIDLINE
16
DIGITAL DUCK

4.5 FACTORY PRESETS

The 16 BISCUIT presets contain factory settings called the factory pre-
sets. 27
By saving your own presets, you will erase these factory presets.
You can still recall these 16 factory presets whenever you want. While
pressing the BRAIN switch, press the FILTER switch. Keep pressing the
BRAIN switch for 4 seconds. The switches 1 to 8 will first flash red
28
after 2 seconds, and will flash pink 2 seconds later. Press one of the
switches 1 to 8 to recall the desired factory preset. Switches stop flashing.
Only the selected switch stays alight for 2 seconds.
27