Kennmex EZPPC70-7B-C1G User Manual page 39

Right
If you set the Edge to "Smaller", TouchKit will reduce the vertical
position of the right edge. If you set the Edge to "Larger", TouchKit
will extend the vertical position of the right edge.
In some cases, cursor will be behind the finger when you touch the
panel. If you can not see the cursor when you touch down the panel,
you can set X Axis or Y Axis to move the cursor.
Offset X Axis
If you set the Offset X Axis to Smaller, cursor will be moved a pixel of
X Axis to left.
If you set the Offset X Axis to Larger, cursor will be moved a pixel of
X Axis to right.
Offset Y Axis
If you set the Offset Y Axis to Smaller, cursor will be moved a pixel of
Y Axis to top.
If you set the Offset Y Axis to Larger, cursor will be moved a pixel of
X Axis to bottom.
Edge Compensation Switch
You can check Support Edge Compensation check box to
enable/disable this function from left corner.
Edge Compensation Button
Click +10% or -10% button to adjust the smaller or larger of edge.
If you click +10% button, the top, bottom, left and right edges will
extend 10% of orientation to touch screen, and cursor will be moved
10 pixel of X and Y Axis to right and top.
If you click -10% button, the top, bottom , left and right edges will
contract 10% of orientation to touch screen, and cursor will be
34
Chapter 6