Inserting/Ejecting Compact Flash Card - Mitsubishi DX-TL800EZ Operation Quick Manual

REC terminal
Input terminal to start recording. Not available dur-
ing timer recording.
EMERGENCY terminal
Input terminal for making it shift to EMERGENCY
recording mode compulsorily.
RESERVED terminal
Not available.
MODE OUT 1 ~ MODE OUT 4 terminals
Output terminal to indicate the unit's current mode.
Select the unit's condition by MODE OUT 1 ~ MODE
OUT 4 setting in the <REAR TERMINAL SETTINGS>
menu.
CALL OUT terminal / CALL OUT GND terminals
This is the ISOLATION output terminal. Information
that can be transmitted externally consists of CALL
OUT settings made on the <REAR TERMINAL SET-
TINGS> menu screen as well as fixed output set-
tings.
DC 5V OUT terminal
Will only output when both the MAIN switch and
POWER button are ON. The maximum electric cur-
rent is 30mA.
12. RS-232C socket
This terminal is used to connect to host device with
RS-232C terminal. This unit can be controlled by the
other device through this terminal.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• QUICK GUIDE

Inserting/Ejecting Compact Flash Card

Before use the Card, read the cautionary notes de-
scribed in the manual included with Compact Flash
Card.
<Inserting Card>
1. Remove the COMPACT FLASH slot cover attached to the
unit.
2. Please turn down the side which contains notch in right and
left, securely insert the Card in the direction of the arrow until
the EJECT button pops out.
Do not eject the Card when copying/restoring, copy-
ing/loading menus, or immediately after inserting the
Card. The Card or the contained data may become
damaged.
Securely insert the Compact Flash Card. Other-
wise, the unit may not work properly.
Please use the Compact Flash Card of an original
format (FSM1) of Mitsubishi. When the Card of a dif-
ferent format from FSM1 is used, there is a possibility
that reading and writing of data may not operate nor-
mally.
When using a new Card, be sure to execute CFC
DATA CLEAR in the <INFORMATION/SERVICE>
screen.
<Ejecting Card>
1. Press the EJECT button and eject the Card.
2. Attach the COMPACT FLASH slot cover.
ACCESS
POWER
VIDEO OUT
SPLIT/
ZOOM
SEQUENCE
AUDIO OUT
VIDEO OUT
Compact Flash Card
REC/STOP
1 2 3 4 5 6 7 8 9 CLEAR/
REW
TIMER
SPLIT/
ZOOM
SEQUENCE
PRE ALARM M-DET EMERGENCY LOCK
SET UP SEARCH STOP PAUSE REV. PLAY PLAY
COPY
AUDIO OUT COMPACTFLASH SHUTTLE PLAY
MODE
HOLD
EJECT Button
COPY
ENTER/
FF
5