Sanyo SFX-33 Instruction Manual page 49

9. Press [STOP] to return to stand-by mode.
23 Oct. '95 12:00
10. Print an activity report (See page 37) to make sure
that your station name and fax number have been
programmed correctly.
To interrupt programming, press [STOP/C] twice.
If you make a mistake in entering a number, move the cursor over the wrong digit using the [<] or
[}] key. Press [DELETE] to erase it. Then enter the right digit.
To enter a hyphen (-) between two digits, press [SPEED DIAL].
To enter a plus sign (+) preceding your fax number, press [HOLD].
The header can be printed either outside the original document (in the top margin) or inside the
document itself. You can select the desired setting using feature switch No. 20 (See page 49-50.)
Default setting is printing outside of the original.
NOTE: If you choose to print the header inside the document, the top of the original document
(about 1 cm/O.4") may not be reproduced.
Printing outside of the original.
I
1
23 Oct. '9512:00 SANYO FAX 012345
P.1
---- -—-——— -- ---— -——— —— -- --—————- --—- ———- —--- ---- --—— -—
1
,
1
1
1
,
t
1
1
Printing inside of the original.
1
------— —— —---- ---—-————— —--———————— —-----— ———-——— ———-—,
:23 Oct. '9512:00 SANYO
FAX 012345 P.1 i
I
1
!
,
48