Av (Composite Video) (Good) - Sharp LC-32LB370U User Manual

AV (composite video) (good)

On your TV
AV cable Audio cable
connector connectors
AV jack
audio jacks
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an AV cable (not provided) to the Y / VIDEO jack and L and R audio jacks on the back of your TV and to the AV
and audio out jacks on the cable or satellite box.
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to select AV, then press ENTER.
Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green
Y / VIDEO jack.
Analog
Important
• The Y / VIDEO, P , and P
B
video device) share the L and R audio jacks with the Y / VIDEO jack
(used to connect an AV device). You can only connect one component
video or AV device at a time. We suggest upgrading to HDMI if your DVD
or Blu-ray player supports it.
• When you connect the audio using the L and R audio jacks, the audio
output is analog.
LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV
Back of TV
video jacks (used to connect a component
R
Cable or
satellite box
AV cable
16