Cec-Compatible Device - Sharp LC-32LB370U User Manual

Problem Solution
After Auto
• Reception can vary by channel
Channel Search,
depending on the broadcast
there are no
power level of a given station.
channels.
Contact your cable or satellite TV
provider.
• Make sure that the antenna or
cable/satellite TV is connected
securely to your TV.
• Try replacing the cable between
the antenna/cable or
cable/satellite box and your TV.
One or more
• Make sure that the channels are
channels do not
not blocked. See
display.
parental control
page 54.
• Make sure that the channels are
not hidden. The channel may
have been deleted from the
channel list. You can tune to the
channel by pressing the number
buttons or you can add the
channel back to the channel list.
See "Hiding
page 49.
• If you are using a cable or satellite
box, use the remote that came
with that box to change channels.
• Make sure that you have the
correct input selected to view
channels from the cable or
satellite box.
• If you are using an antenna, the
digital channel signal may be low.
To check the digital channel
signal strength, see
the digital signal
page 52.
Password is lost.
• Enter 9999 to access parental
controls, then set a new
password. See
changing the
page 52.
Some settings
• If a setting is grayed, the setting is
cannot be
not available in the current video
accessed.
input mode.
TV cabinet
• When the TV is in use, the
creaks.
temperature rises naturally and
may cause the cabinet to expand
or contract which can cause a
creaking noise. This is not a
malfunction.
Control buttons
• Make sure that the Button Lock
do not work.
option is set to Off. See
control
• Unplug the power cord, wait a
few seconds, then plug the cord
back in and turn on your TV.
TV keeps
• Make sure that the sleep timer is
turning off.
not turned on. See
sleep
"Setting
levels" on
channels" on
"Checking
strength" on
"Setting or
password" on
"Locking
buttons" on page 56.
"Setting the
timer" on page 60.
LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV
Problem Solution
A retail banner
• You selected "Store" mode when
is displayed.
you ran the EZ SETUP wizard.
Reset your TV to the factory
defaults, then select Home on the
What is your viewing environment
screen. See
the

CEC-compatible device

Problem Solution
My TV is not
• Make sure that the HDMI cable is
displaying the
connected securely to your TV
video from the
and the device.
connected CEC
• Make sure that the device is
device.
connected to your TV with an
HDMI cable.
• Make sure that the device is a
CEC-compatible device. See the
documentation that came with
the device for more information.
• Make sure that the correct video
input source is selected. See
"Selecting the video input
source" on page 36.
• Make sure that the CEC Control
feature is turned on. See
CEC Control on or
page 38.
• Try adjusting the TV picture. See
"Adjusting the TV
page 44.
• If the device is not a Sharp device,
it may not be compatible with
your TV.
"Restoring settings to
defaults" on page 64.
"Turning
off" on
picture" on
68