Coaxial (Good) - Sharp LC-32LB370U User Manual

Coaxial (good)

On your TV
Coaxial cable
connector
ANT / CABLE
jack
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not provided) to the ANT / CABLE jack on the back of your TV and to the coaxial out jack on the
cable or satellite box.
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to highlight TV, then press ENTER.
7 If you cannot tune to channels you know exist, scan for channels. See
17
Notes
• Use a coaxial cable to eliminate interference and noise from radio
waves.
• Do not bundle the coaxial cable with the power cord or other cables.
LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV
Cable or
satellite box
Coaxial cable
Back of TV
"Automatically scanning for channels" on page 48.