Step 6: Wireless Setup - Opticon SBG-1000 Quick Start Manual

OptiCon SBG-1000

6.1.6 Step 6: Wireless Setup

This step enables you to rename your wireless network, as well as change its security level.
OptiCon SBG-1000 assigns a default name for its wireless network, which you may later change. Select the wireless
security level. The default "Medium" level secures your network by requiring users to provide a password in order to
connect. "High" level utilizes the Wi-Fi Protected Access (WPA) protocol, requiring a password (network key) as well,
but also encrypts the wireless traffic. When selecting this option, enter an eight-character password in the provided
field. Click 'Next' to continue.
6.1.6.1 Setup via Wireless Connection
If you are running the installation wizard while being connected to OptiCon SBG-1000 via a wireless connection, the
wizard does not change the default SSID (to prevent you from disconnecting). If you choose to change it manually,
the following screen appears, requesting that you re-establish your wireless connection (from your computer) before
proceeding with the wizard.
This screen also appears after selecting the High wireless security level, or after changing the previously entered
WPA password (sees Figure 6.13).
Figure 6.12 Wireless Setup
Figure 6.13 Wireless Setup
19
Quick Start Guide