Table of Contents
Advertisement
OptiCon SBG-1000
3.1.7 Ethernet (WAN port)
ITEM
Connector
WAN Interface
Maximum Wiring Distance / Cable
3.1.8 PoE (LAN port 1 ~ LAN port 4 only, LAN port 5 ~ LAN port 8 are not supported)
ITEM
Interface Specification
3.1.9 WiFi
ITEM
Interface Specification / Frequency
Note: Basically, we recommend the wall mounting installation for better wireless characteristics.
3.1.11 DECT
ITEM
Frequency
Note: Basically, we recommend the wall mounting installation for better wireless characteristics.
3.1.12 USB
ITEM
Interface Specification
3.2. System Capacity
LIP
Phones
Total
(Basic)
Total
(Extended)
N1) The number of VoIP Trunk when DECT module is enabled.
* PSTN Back-up function using CIU4.
* DECT Specification: 4 Simultaneous Calls, 6 Registrations
* Lock key is required for system capacity extended.
RJ-45 Modular Jack
10/100/1000 BASE-T (Auto-Negotiation), 10 Mbps or 100 Mbps or
1000 Mbps, IEEE 802.3/ IEEE 802.3ab/ IEEE 802.3az
100 m/ 0.328 kft, Category 5e UTP Cable for 1000 Mbps
Extension
SLT
11
1
23
1
SPECIFICATION
IEEE 802.3af (Total PoE Budgets : 20 W)
IEEE 802.11 b/g/n (Draft 2.0), 2x2 MIMO, 2.412GHz ~ 2.472GHz
1,880MHz ~ 1,900MHz for Europe,
1,920MHz ~ 1,930MHz for US
USB V 1.1 & V2.0, Host Mode
SIP
Phones
6
12
6
24
7
SPECIFICATION
SPECIFICATION
SPECIFICATION
SPECIFICATION
DECT
SIP
6
3
N1)
6
4
or 6
Quick Start Guide
Trunk
PSTN
Back-up
4
7
4
8 or 10
Advertisement
Table of Contents
