NAD C 375BEE Owner's Manual page 13

CD PLAYER CONTROL (for use with compatible NAD CD Player): Set the DEVICE SELECTOR
to "CD" in order to gain access to these buttons. Some of the control buttons below are applicable
only to specific NAD CD Player models; check the owner's manual of your NAD CD Player for control
button compatibility. You can also load the applicable NAD code library to this device so that it can be
made compatible with your other NAD equipment. Refer to the section below about "USING THE SR 8
REMOTE CONTROL LIBRARY" on how to load a NAD code library.
SCAN [ ]: Fast reverse/forward search.
[ ] : Open or close disc tray.
[ ] : Stop playback.
[ ] : Pause playback temporarily.
[ ] : Go to next track/file.
[ ] : Go to beginning of current track/file or to previous track/file.
[ ]: Start playback.
[ ]: Select through folder list/Select through WMA/MP3 files.
ENTER: Select desired folder or WMA/MP3 file.
DISP: Show playback time and other display information.
RAND: Play tracks/files in random order.
RPT: Repeat track, file or whole disc.
PROG: Enter or exit program mode.
CLEAR: Delete track or file number from the program list.
CD: Select CD as the active source.
USB: Select USB as the active source.
OPT: Select optical input as the active source.
SRC: Select desired SRC mode.
TUNER CONTROL (for use with compatible NAD Receiver, AM/FM/DB Tuner): Set the DEVICE
SELECTOR to "TUN" in order to gain access to these buttons. Refer to the corresponding labels printed
in the remote control faceplate and their respective assigned buttons to make use of these functions.
Some of the control buttons below are applicable only to specific NAD Receiver or Tuner models;
check the owner's manual of your NAD Receiver or Tuner for control button compatibility. You can also
load the applicable NAD code library to this device so that it can be made compatible with your other
NAD equipment. Refer to the section below about "USING THE SR 8 REMOTE CONTROL LIBRARY" on
how to load a NAD code library.
AUTO TUNE: Automatically scan all available local DAB broadcasts.
TUNE [ ] or [ ]: Tune forward or backwards.
PRESET [ ] or [ ]: Step up or down Preset numbers.
AM/FM/DB: Select XM, DAB, FM or AM band as applicable.
TUNER MODE: Activate "FM Mute On" or "FM Mute Off" at FM mode. In combination with [
select through applicable XM or DAB menu options.
BLEND: Engage or disengage BLEND feature.
MEMORY: Save current station into a preset number.
DELETE: Delete selected preset number or all preset numbers.
[ ]: In combination with TUNER MODE or other compatible buttons, select through applicable
XM or DAB menu options.
ENTER: Select Preset or Tune mode at AM/FM band. Display signal strength at DAB mode.
INFO: Show display information as supplied by the currently tuned RDS station, XM channel or
DAB broadcast.
IDENTIFICATION OF CONTROLS
SR 8 REMOTE CONTROL
],
13