Connecting A Handsfree Headset Or Car Kit - SoftBank X06HT User Manual

Connecting a Handsfree Headset
or Car Kit
Turn on the handsfree headset or Car Kit and
activate the partnership mode beforehand.
For details, see the Handsfree Headset User
Guide.
1.
Menu Key ( ) ＞ Settings
2.
Wireless & networks
settings ＞ Check "Bluetooth" box
Handset will start to scan for Bluetooth
devices within range and will show all
detected devices below the Bluetooth
devices section.
If you do not find the device in the list,
tap Scan for devices to scan again.
3.
Select the handsfree headset or car
kit in the list
4.
Enter passcode supplied with
headset ＞ OK
For passcode, see Handsfree Headset
User Guide.
®
When a Bluetooth headset or car kit is
connected to handset, Bluetooth
connected icon ( ) appears in Status
Bar. Depending on the type of headset
or car kit you have connected, you can
then start using the headset or car kit to
listen to music and/or make and receive
phone calls.
Disconnecting a Handsfree
Headset or Car Kit
1.
Menu Key (
2.
Wireless & networks
settings
＞ Bluetooth
3.
Tap and hold the device to
®
disconnect ＞
Tap Disconnect & unpair
®
handset to erase all pairing information
with the handsfree headset or car kit.
You will be prompted to enter the
passcode again when you connect to
that Bluetooth
Tip
･ Enjoy stereo sound with handsfree
headsets supporting A2DP.
®
) ＞ Settings
＞ Bluetooth
Disconnect
if you want
®
device.
12-3