Expansion Card - HP EliteDesk 700 G1 Maintenance And Service Manual

Expansion card

Description
nVidia Quadro NVS310 PCIe x16 graphics card, 512 MB
nVidia Quadro NVS315 PCIe x16 graphics card, 1 GB
AMD Radeon HD8490 PCIe x16 graphics card, 1 GB
AMD Radeon HD8450 PCIe x16 graphics card, 1 GB
HP WLAN 802.11 a/b/g/n 2x2 PCIe module
Intel PRO/1000 single port GbE NIC, includes bracket
The computer has two PCI Express x1 expansion slots, one PCI Express x16 expansion slot, and one
PCI Express x16 expansion slot that is downshifted to a x4 slot.
NOTE:
The PCI Express slots support only low profile cards.
You can install a PCI Express x1, x4, x8, or x16 expansion card in the PCI Express x16 slot.
For dual graphics card configurations, the first (primary) card must be installed in the PCI Express x16
slot that is NOT downshifted to a x4.
To remove, replace, or add an expansion card:
1.
Prepare the computer for disassembly
2.
If the computer is on a stand, remove the computer from the stand.
3. Remove the access panel
4. Locate the correct vacant expansion socket on the system board and the corresponding expansion
slot on the back of the computer chassis.
(Preparation for disassembly on page
(Access panel on page 23).
22).
Expansion card
31