Sony HXCU-100 Operating Instructions Manual page 28

NETWORK SETTINGS menu
Page name Item
Page No.
<TCP/IP IP ADDRESS
SETTING>
SUBNET MASK
N01
DEFAULT
GATEWAY
SET
<LAN AUTO
SETTINGS> NEGOTIATION
N02
AUTO MDI/MDIX
CONNECTION
SPEED
DUPLEX MODE
MDI/MDIX
LINK CONDITION
SET
<CNS CNS MODE
SETTINGS>
Network
N03 connection mode
selection
CCU NO
TARGET IP
ADDRESS
SET
<NETWORK ALL RESET
RESET>
N04
28
Setup Menu
Settings
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
ENTER to execute
A "SET OK?" message
is displayed. Press
ENTER again to confirm
the change.
ON, OFF
ON, OFF
10M, 100M
HALF, FULL
MDI, MDIX
(DOWN), (UP)
(Read only)
ENTER to execute
A "SET OK?" message
is displayed. Press
ENTER again to confirm
the change.
LEGACY, BRIDGE, PC
CONTROL
LEGACY: External
controller connected
using CCA-5 cable only
BRIDGE: External
controller connected
using point-to-point LAN
cable
PC CONTROL*:
HZC-RCP5 connected
using LAN cable
* The unit's software
version must be 1.20
or above.
Default: 0
1 to 96, A to Z
0.0.0.0 to 255.255.255.255
ENTER to execute
A "SET OK?" message
is displayed. Press
ENTER again to confirm
the change.
ENTER to execute
A "NET SETTINGS
RESET OK?" message
is displayed. Press
ENTER again to reset
NETWORK SETTINGS
menu items to factory
default values.