Compliance; Power Supply; Fcc Compliance - Datalogic QuickScan Mobile Quick Reference Manual

General purpose handheld linear imager bar code reader with datalogic’s star cordless system
Hide thumbs Also See for QuickScan Mobile:
Table of Contents

Advertisement

Compliance

This device must be opened by qualified personnel only.
The batteries must be removed before opening the device.

Power Supply

This device is intended to be supplied by a UL Listed/CSA Certified Power Unit
marked "Class 2" or LPS power source rated 5 V, minimum 0.8 A and having a
cable length <3 m.
Atencíon
Utilice en su red solo fuentes certificadas en Argentina.
El uso de fuentes de alimentación no compatibles puede resultar en riesgo de incendio o de
choque eléctrico para el usuario.

FCC Compliance

Modifications or changes to this equipment without the expressed written
approval of Datalogic could void the authority to use the equipment.
This device complies with PART 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference which may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
26
Características de la
fuente de alimentación
Entrada:
Salida:
eléctrica.
100 - 240 VCA
min 350 mA 50-60 HZ. 
máx 5,2VDC,  máx 2500mA 
(-)Negativo al centro
Compliance
QuickScan™ Mobile

Advertisement

Table of Contents
loading

This manual is also suitable for:

Quickscan m2130

Table of Contents