Installation
Instructions
r OUTSIDE
BACK EXHAUST
(Horizontal
Duct}
INSTALLATION
OVERVIEW
!
B1. Prepare Rear Wall
!
B2. Attach Mounting Plate to Wall
B3. Prepare Top Cabinet
__
_
B4. Adjust Blower
l
:_
BS. ivlount the Oven
---
_
,_
U_L]
J-_
PREPARING THE REAR WALL
FOR OUTSIDE BACK EXHAUST
You need to cut an opening in the rear wall for outside
exhaust.
• Read the instructions on the REARWALL TEMPLATE.
• Tape it to the rear wall, lining up with the holes
previously drilled for holes A and B in the wall plate.
• Cut the opening, following the instructions of the
REAR WALL TEMPLATE.
ATTACH THE MOUNTING
PLATE
TO THE WALL
: i
........... -_ iii/i j
Attach the plate to the wall using toggle bolts. At least
one wood screw must be used to attach the plate to
a wall stud.
[_
Remove the toggle wings from the bolts.
[_
Insert the bolts into the mounting plate through
the holes designated to go into drywall and reattach
the toggle wings to sA" onto each bolt.
15