Outside Back Exhaust; Installation Overview; Attach Mounting Plate To Wall - GE RVM5160 Installation Instructions Manual

OUTSIDE BACK EXHAUST

C

INSTALLATION OVERVIEW

C1. Prepare Rear Wall
C2. Attach Mounting Plate to Wall
C3. Prepare Top Cabinet
C4. Adjust Blower
C5. Mount the Microwave Oven
PREPARING THE REAR WALL
C1
FOR OUTSIDE BACK EXHAUST
You need to cut an opening in the rear wall for
outside exhaust.
• Read the instructions on the REAR WALL
TEMPLATE.
• Tape it to the rear wall, lining up with the holes
previously drilled for holes A and B in the
mounting plate.
• Cut the opening, following the instructions of the
REAR WALL TEMPLATE.
Installation Instructions
(Horizontal Duct)
ATTACH THE MOUNTING
C2
PLATE TO THE WALL
Attach the plate to the wall using toggle bolts. At least
one wood screw must be used to attach the plate to
a wall stud.
1 Remove the toggle wings from the bolts.
2 Insert the bolts into the mounting plate through
the holes designated to go into drywall and
reattach the toggle wings to
Cooki ng
Conve nienc e
Potato
Bevera ge
Popco rn
Defros t Cook
Rehea t Time
Weight/T ime
Timer
Expre ss Cook On/Off
Add
3
1 2 30 Sec.
Turnta ble
6
4 5
Surfac e
9
8 Light
7
Set Vent
Power 0
Clock
Level
Start
Cance l
Pause
Off
onto each bolt.
3 4
21