Setting The Time - Potterton Sirius FS 50 Installation, Operation & Maintenance Manual

•
Press either of the
the display will show the letter P followed by a number (program line);
Figure 3
•
Press the keys until the display shows P1, referring to the time to be set;
•
Press the keys to set the time; on the display, the letter P will start to flash;
•
Press the key to save and exit the programming function;
3.3 setting the MaxiMuM central heating teMperature
- Press the key (2-figure 1) to set the central heating water temperature;
- Press the keys to set the temperature required;
- Press either of the
N.B – With the outdoor sensor connected, the
Press the keys to decrease or increase the room temperature in the premises to be heated.
3.4 setting the MaxiMuM doMestic hot water teMperature
- Press the key (3-figure 1) to set the maximum domestic hot water temperature;
- Press the keys to set the temperature required;
- Press either of the
InstructIons pertaInInG to the user

3.2 setting the tiMe

keys to access the programming function;
keys (1 or 10 - figure 1) to save and return to the main menu.
key (2 - figure 1) can be used to shift the central heating curve.
keys (1 or 10 - figure 1) to save and return to the main menu.
7
912.822.1 - GB