VXI Tria Manual

1. ATTACH A HEADBAND OR EAR HOOK

Behind-the-neck

AMPLIFIER CONNECTION: Connect Tria to the amplifier's headset cord.

DIRECT CONNECT TO HEADSET-READY PHONE: Connect Tria to a lower cord that is compatible with your phone. Then connect

lower cord into the phone's headset port. Some phones allow connection to the handset port (consult the phone's manual).

COMPUTER CONNECTION: Connect Tria to a VXi USB cord or a VXi sound card cord (sold separately).

For technical support or product information please call VXi at 800-742-8588 or 603-742-2888

Over-the-head

Over-the-head

Over-the-ear

Over-the-ear (cushion optional)

TRIA

HEADSET

Position the microphone about

one finger's width away from

your face near the corner of your

mouth (Figure A). The flat side of

the microphone housing is the

talk-side (Figure B). This side must

face your mouth.

Fig. A

Fig. B

™

FLAT

SIDE

Table of Contents

Do you have a question about the Tria and is the answer not in the manual?

Page 1 AMPLIFIER CONNECTION: Connect Tria to the amplifier’s headset cord. DIRECT CONNECT TO HEADSET-READY PHONE: Connect Tria to a lower cord that is compatible with your phone. Then connect lower cord into the phone’s headset port. Some phones allow connection to the handset port (consult the phone’s manual).
Page 2 VXi LIMITED WARRANTY 1. If your VXi headset fails to work for any reason during the first two years from the date of purchase as shown by the purchaser's warranty registration, VXi will repair or replace the headset, at its election, free of charge. You may register your warranty online at www.vxicorp.com, or by calling customer service at 800-742-8588.